|
|
Post by ◄VR► on Oct 13, 2014 10:52:16 GMT -6
I don't recall having hand issues with my Krillin. You can heat the hands a bit wit hot water to make putting them on a bit easier, if you want.
|
|
|
|
Post by gotenks on Oct 13, 2014 10:57:03 GMT -6
I don't recall having hand issues with my Krillin. You can heat the hands a bit wit hot water to make putting them on a bit easier, if you want. the problem is that the hand peg is too small/the hole is too big |
|
|
|
Post by ◄VR► on Oct 13, 2014 10:58:48 GMT -6
Well, then my suggestion would probably make it worse  |
|
|
|
Post by gotenks on Oct 13, 2014 11:03:37 GMT -6
any other ideas? if not I'm gonna contect the seller
|
|
|
|
Post by ◄VR► on Oct 13, 2014 11:08:32 GMT -6
For fixing holes that are too big? Other than filling them with some sort of putty or putting glue on the joint, not really. You would probably be better of getting another one, if you can.
|
|
|
|
Post by Branjita on Oct 13, 2014 21:22:42 GMT -6
Put petroleum jelly (Vaseline) on the peg, use hot glue in the joint, stick the peg in immediately and let it cool off for 20 minutes.
That will fix the problem, but it's dumb that the figures aren't always perfect for the price.
|
|
|
|
Post by wiizardii01 on Oct 31, 2014 5:56:57 GMT -6
Is it just me, or does it seem that the goku and gohan figures that has the gi shoulder thingys always pop off when I move the biceps? When I bought my normal goku, his right gi shoulder thing always pops off, proabably due to the one peg that holds it. I would have preffered if there was two pegs, but yeah. For mine, its loose.
|
|
|
|
Post by gil on Oct 31, 2014 15:52:11 GMT -6
It's just your figure my friend. I have used 7 goku's before for customizing and only one that has that loose sleeve. The rest of them are perfectly fine, with no problem.
|
|
|
|
Post by wiizardii01 on Nov 2, 2014 5:55:41 GMT -6
any other ideas? if not I'm gonna contect the seller Its nothing to worry about in my opinion. Ignore it, don't spend another 60$ or so bucks for another Krillin just for some hand issues, you'll be fine. Just display it and nothing else will happen. |
|
|
|
Post by gotenks on Nov 2, 2014 7:13:55 GMT -6
any other ideas? if not I'm gonna contect the seller Its nothing to worry about in my opinion. Ignore it, don't spend another 60$ or so bucks for another Krillin just for some hand issues, you'll be fine. Just display it and nothing else will happen. Already sent it to the seller back and he need to send me a new one haha |
|
|
|
Post by gotenks on Nov 6, 2014 6:10:34 GMT -6
it may sound a little wierd, but just now I noticed that the sleeves on my goku are very loose. its been like this since I bought it. and I didn't thought it is a big problem, but now I see that its very loose compare to others, its just falling out when I touch it. so I thought on buying a new one now, before his price starts to rise, and when it will rise I'll sell the old one.
|
|
|
|
Post by gotenks on Nov 6, 2014 10:21:45 GMT -6
I don't think I'll buy a new one anymore, but do you guys know something that'll make it tighter?
|
|
|
|
Post by wiizardii01 on Nov 7, 2014 14:41:31 GMT -6
Jeez, what's up with the buying an entire new figure just because of one small problem thing?  Personally, I think you should just ignore it like I said before, why should you pay 60$ when you should be saving for BROLY, VEGITO AND SUPER BUUU??? Hmmmmmmmmm.....  Well, you could try to press it in, if that helps. But just don't buy a new one, I always just ignore the small problems on figures, besides it always happens on alot of toys. |
|
|
|
Post by gil on Nov 7, 2014 15:14:16 GMT -6
If it's the sleeve that attach on his shoulder that is a simple fix. Remove the sleeve, add glue on the ball peg. Not the whole peg itself, just the ball peg I don't even know if that's the right name for it. Anyways let the glue dry and once it's dry insert the sleeve back in. If you let's say you put too much glue that it wouldn't go back in the shoulder, you can dip the shoulder into hot water to soften the plastic so it will be easier to insert the sleeve/peg back in.
|
|
SupremeKai
Rank: Cooler's Squadron
Watching you poop!
Posts: 1,091
|
Post by SupremeKai on Nov 9, 2014 21:48:14 GMT -6
Broke a Trunks today... his darned scabbard broke off and is now free from the locating pin that inserts into Trunks's back, which is now stuck in there. Had to super glue it permanently to his back. It's a sad day for SH Figuarts...
|
|
