|
|
Post by Deleted on Nov 10, 2014 17:25:42 GMT -6
Broke a Trunks today... his darned scabbard broke off and is now free from the locating pin that inserts into Trunks's back, which is now stuck in there. Had to super glue it permanently to his back. It's a sad day for SH Figuarts... Try to remove the broken peg from his back and replace it with a new one from one of those 2$ bootlegs. |
|
|
|
Post by ◄VR► on Nov 10, 2014 17:27:36 GMT -6
It's a bit late for that, if he's already glued it to his back.
|
|
|
|
Post by Seal on Nov 12, 2014 22:49:43 GMT -6
My krillin was a nightmare. i already posted it on the Check this Out thread but ill do a TLDR for others lurking this thread months later
head joint snapped in two(fixed by warming it up and putting it back together while plastic was flimsy nd then froze it back to solid plastic)
and sleeve has a nice little cut in it, straight out of the package too. I really shoulda seen it before opening it so i coulda returned it. ah well.
guess i wont be selling this back
|
|
|
|
Post by wiizardii01 on Nov 13, 2014 11:50:34 GMT -6
That f**king sucks ASS. I am going to buy a krillin, I'll take that as a heads up when I get it, thanks for posting that SST, it'll be helpful now that I am about to buy the Krillin.
|
|
|
|
Post by Seal on Nov 13, 2014 12:32:16 GMT -6
Just returned my krillin figure after going to 2 different Barnes nd nobles. Got my gift card and placed another order. Here's to hoping this new one dose not suck
|
|
|
|
Post by desertedearth on Nov 26, 2014 22:48:45 GMT -6
Anyone have any tips on how to make an arm stay on? I have ssj goku and his left arm is extremely loose at the bicep! His whole arm just falls out under the shoulder. Does super glue and Vaseline actually work? Any other advice?
Thanks
|
|
|
|
Post by wiizardii01 on Dec 1, 2014 11:12:38 GMT -6
My android 17 has a problem standing, is this a problem amongst most people?
|
|
|
|
Post by ◄VR► on Dec 1, 2014 11:14:39 GMT -6
I didn't have that issue at all, I was even able to get him to stand on one leg  |
|
|
|
Post by Seal on Dec 1, 2014 18:58:46 GMT -6
Anyone have any tips on how to make an arm stay on? I have ssj goku and his left arm is extremely loose at the bicep! His whole arm just falls out under the shoulder. Does super glue and Vaseline actually work? Any other advice? Thanks suddenly i am having the exact same problem |
|
|
|
Post by desertedearth on Dec 2, 2014 20:12:52 GMT -6
Anyone have any tips on how to make an arm stay on? I have ssj goku and his left arm is extremely loose at the bicep! His whole arm just falls out under the shoulder. Does super glue and Vaseline actually work? Any other advice? Thanks suddenly i am having the exact same problem Yeah this sucks. A couple days ago I applied as much force as I could for a like ten seconds. Doesn't wiggle, but I won't twist because I know it will become loose again. Leave the arm in one position I guess... |
|
|
|
Post by Seal on Dec 2, 2014 20:50:56 GMT -6
i just ordered some clear nail polish. It should be here tomorrow. Its supposed to make joints tighter by creating a thin layer of polish around it. I hope it works, it makes sense that it would actually so im not worried. its gonna work  |
|
|
|
Post by Seal on Dec 4, 2014 21:50:26 GMT -6
My ss goku's arm would fall off if i even looked at it funny. Decided to buy some clear nail polish and apply it to the end of the peg. It's drying now and i feel it would be best if i let it dry for a while. Since i still want it in my display, i decided to set it up like this  |
|
|
|
Post by mello on Dec 4, 2014 21:56:43 GMT -6
My ss goku's arm would fall off if i even looked at it funny. Decided to buy some clear nail polish and apply it to the end of the peg. It's drying now and i feel it would be best if i let it dry for a while. Since i still want it in my display, i decided to set it up like this I can feel so much pain in this one picture hahaha. |
|
|
|
Post by gotenks on Dec 10, 2014 8:12:29 GMT -6
again, I have a problem  I just got SDCC Piccolo and I have a problem with him - that peg on the right arm (see in the picture below) has some problem. I cant get the right arm inside of it nor the right side of the crossed arms. the other peg is great and the left arm get inside the peg well, as long as the left side of the crossed arms. but the right side is a problem. the right hand just fall when I put it in, and I don't even hear a click when I get it in while in the left arm I do hear a click. picture of the peg I'm reffering to -  |
|
|
|
Post by Branjita on Dec 10, 2014 8:51:04 GMT -6
gil, can you please post detailed instructions for fixing the arm issues? I'd like to add it to the first post in this topic since this sounds very common. I believe I remember you having the most sensible solution to it if I remember correctly.
|
|
