|
|
Post by friezku on Apr 18, 2021 21:42:21 GMT -6
|
|
silver
Rank: Pig Bandit
Posts: 27
|
Post by silver on Apr 19, 2021 5:57:42 GMT -6
Hi, i totally agree. Thanks for the tip, however i am to afraid to break it while dismantling him, I just hope that the new one will be looser at the swivels. It sucks that you get stressed instead of enjoying the figure |
|
silver
Rank: Pig Bandit
Posts: 27
|
Post by silver on Apr 19, 2021 6:29:38 GMT -6
Hey guys , another way to fix bardock. Do it at your own risk,and buy shock oil, invest more money as if the figurines weren't expensive enough hono on this video The guy told to not rotate the arm while pulling it edit: Just get a replacement if you can |
|
hono
Rank: Ginyu Force
Posts: 997
|
Post by hono on May 13, 2021 11:17:20 GMT -6
Hey guys , another way to fix bardock. Do it at your own risk,and buy shock oil, invest more money as if the figurines weren't expensive enough hono on this video The guy told to not rotate the arm while pulling it edit: Just get a replacement if you can I am going to get silicone oil for Recoome and Bardock, but I am not going to remove Bardock’s arms, I think that is possible to apply the oil through the gap between the triceps and elbow |
|
hono
Rank: Ginyu Force
Posts: 997
|
Post by hono on May 13, 2021 15:35:40 GMT -6
I was able to make Recoomes shoulders loose, but... you have to use some force to make them move, so in the process the buttefly joints become loose too. smh
|
|
silver
Rank: Pig Bandit
Posts: 27
|
Post by silver on May 15, 2021 15:05:46 GMT -6
I was able to make Recoomes shoulders loose, but... you have to use some force to make them move, so in the process the buttefly joints become loose too. smh Hey, at least you didn't break reecome's arm. I got a bardock replacement and it's stiff as well. If you manage to correct it with a silicon oil through the gap, just reply me, i'll do the same |
|
hono
Rank: Ginyu Force
Posts: 997
|
Post by hono on May 29, 2021 10:05:06 GMT -6
Ginyu loose leg/knee joint  |
|
|
|
Post by afrosaiyan on May 29, 2021 10:57:39 GMT -6
Woah you have really bad luck. After seeing this I cracked open my Ginyu finally to make sure he was okay and he's fine outside of very, very minor issues like the hinge on his right shoulder and hip armor being a tad loose as well as his left leg joint but it's nothing that breaks my figure or makes him defective.
|
|
hono
Rank: Ginyu Force
Posts: 997
|
Post by hono on May 29, 2021 11:19:07 GMT -6
Woah you have really bad luck. After seeing this I cracked open my Ginyu finally to make sure he was okay and he's fine outside of very, very minor issues like the hinge on his right shoulder and hip armor being a tad loose as well as his left leg joint but it's nothing that breaks my figure or makes him defective. That Ginyu is not mine, I am just sharing |
|
|
|
Post by dippergames420 on May 29, 2021 11:27:11 GMT -6
Ginyu loose leg/knee joint Ah cripe, here we go again... |
|
hono
Rank: Ginyu Force
Posts: 997
|
Post by hono on May 29, 2021 13:44:43 GMT -6
I was able to make Recoomes shoulders loose, but... you have to use some force to make them move, so in the process the buttefly joints become loose too. smh Hey, at least you didn't break reecome's arm. I got a bardock replacement and it's stiff as well. If you manage to correct it with a silicon oil through the gap, just reply me, i'll do the same I tried silicone oil today and for now the issue is solved. I was able to fix my Goku Black stiff hip joint (still makes noise, but dont have so many resistance to move) and Bardock arms. Regarding Bardock, hot water for around 1 min, then when the arm is loose, apply silicone oil through the gap between the elbow and triceps, then rotate the arm to spread the oil. Now the arms make a bit of noise, but not many resistance to turn them. |
|
|
|
Post by afrosaiyan on May 29, 2021 15:49:03 GMT -6
Woah you have really bad luck. After seeing this I cracked open my Ginyu finally to make sure he was okay and he's fine outside of very, very minor issues like the hinge on his right shoulder and hip armor being a tad loose as well as his left leg joint but it's nothing that breaks my figure or makes him defective. That Ginyu is not mine, I am just sharing Oh okay, then whoever's Ginyu that is has really bad luck. |
|
hono
Rank: Ginyu Force
Posts: 997
|
Post by hono on Aug 18, 2021 17:22:36 GMT -6
|
|
|
|
Post by dippergames420 on Sept 30, 2021 9:04:04 GMT -6
This one is very surprising http://instagram.com/p/CUcpVlSgLCV Yeah, shock of all shocks I know. Poor casting plus tiny ball hinge and flimsy plastic results in breakage, who knew? |
|
hono
Rank: Ginyu Force
Posts: 997
|
Post by hono on Oct 2, 2021 7:07:05 GMT -6
I got a problem with my Full Power Goku. The sash came backwards, so I cant really move the waist. I tried to disassamble it, but it is too tigh and I`m afraid to break it. Any tips? Hot water or hair dryer?
|
|
