|
|
Post by rampage on Aug 31, 2014 20:46:00 GMT -6
Only issue I've ran into is one of my Frieza's legs doesn't sit as well as the other. It's a bit of a challenge to pose him without part of the joint at the top being seen. The leg also can come off with relative ease. Meh could be worse.
That and krillins sleeves are really annoying.
|
|
|
|
Post by angelo2113 on Sept 1, 2014 1:18:52 GMT -6
Does anybody know how to fix super saiyan goku bicep swivel? Everytime y touch the arm it falls off I know how to fix this problem without using glue, this always happen to me when I take apart my figures for customization and also sometimes when I open the figure the biceps falls off. Steps: 1.) remove the sleeve that connect to the shoulder. 2.) remove the shoulder from the torso, just simply full it and it will pop right off. If your having trouble dip it into hot water. 3.) things to know; dipping the figure into hot water will soften the material. The peg that connects to bicep and ballpeg that connects to the torso is all one piece. The shoulder it self is the reason why the the bicep keeps falling off, it's restricting the peg to go all the way inside the peg hole. 4.)dip the arm/biceps and the shoulder into hot water. 5.)use one hand/fingers to hold the biceps for support, then the other hands/fingers will push the peg in to the hole. Push it by the ball peg, if first try didn't work, dip the arms/bicep and shoulder again into hot water a lil longer and repeat the step 5th step. You can also use your palm which I do sometimes, use your palm to ouch the peg in. It is also better to use your t-shirt to push it will add lil padding from hurting your fingers or palm and it also gives that grip. 6.) when the shoulder is finally connected to the bicep THEN connect the arms/shoulder to the torso. I hope this made sense, if not let me know and I will try to take a picture when I get a chance once I get home. I tried this out. The shoulder ball peg would absolutely not come out of the torso, at all. The shoulder itself actually pulled off before the piece that connected it to the torso. I tried using pliers but didn't want to take a chance so I pushed down the shoulder and the peg seemed to have been exposed more. Then I pushed the bicep socket onto the peg and it seems to have work for now. I'm going to let it cool off and then twist and turn the bicep to see if it completely worked in the morning. Thanks, Mr. Simple! |
|
|
|
Post by viscorpion on Sept 7, 2014 19:46:43 GMT -6
well all on my figure is ok except from the arms they pull off too easly i cant find a way to fix them any ideas? i tried whit nail enamel but dosent seems to work.
|
|
|
|
Post by angelo2113 on Sept 7, 2014 21:33:30 GMT -6
With the Super Saiyan Goku or Normal Goku?
|
|
|
|
Post by rampage on Sept 8, 2014 11:49:50 GMT -6
My piccolo seems to have a ridiculously hard time getting the head on with the cape. Also his special beam cannon hand barely fits, it's loose.
|
|
|
|
Post by angelo2113 on Sept 8, 2014 12:18:11 GMT -6
My piccolo seems to have a ridiculously hard time getting the head on with the cape. Also his special beam cannon hand barely fits, it's loose. Are the pegs completely in? I've had trouble with some of the heads/hands into the pegs, as well, but pushed them in harder, but safely. |
|
|
|
Post by rampage on Sept 8, 2014 14:00:17 GMT -6
My piccolo seems to have a ridiculously hard time getting the head on with the cape. Also his special beam cannon hand barely fits, it's loose. Are the pegs completely in? I've had trouble with some of the heads/hands into the pegs, as well, but pushed them in harder, but safely. the one for the head is really hard to get in, but when I get it in it works. I think I get what you mean, like the Krillin head that came with 18? Yeah if I push a bit harder and really work it, it stays in a bit better. But its still awkward for trying to position it for a pose. |
|
OtakuDude
Rank: Namekian Frog
Posts: 4 
Species: Saiyan
|
Post by OtakuDude on Sept 8, 2014 16:07:38 GMT -6
I have a SHF Base Goku and his bicep keeps falling off ever since I opened him up. Whenever I reattach it it just falls off. Please help! (It's the left bicep)
|
|
|
|
Post by rampage on Sept 8, 2014 16:54:32 GMT -6
|
|
OtakuDude
Rank: Namekian Frog
Posts: 4
Species: Saiyan
|
Post by OtakuDude on Sept 9, 2014 14:34:01 GMT -6
Normal Goku bicep keeps falling off! Wont reattach  |
|
|
|
Post by tedruiz619 on Sept 17, 2014 23:21:23 GMT -6
Guys, is it me or does the Cell figure feel a bit loose all over or is it just mine?
|
|
Wave
Rank: Cooler's Squadron
Even the greatest can die.
Posts: 1,070
Species: Human
|
Post by Wave on Sept 17, 2014 23:47:59 GMT -6
My Cell holds all his poses. Not loose in the least, but wonderfully smooth. Goku has hard joints that click and clack when I move his legs.
|
|
|
|
Post by gotenks on Sept 18, 2014 0:56:39 GMT -6
My normal goku has a little loose legs, not really important but its being a problem sometimes
|
|
|
|
Post by tedruiz619 on Sept 18, 2014 9:08:58 GMT -6
Okay maybe I'm just crazy then, he holds his posing but just isn't as tight as some of the other figures I'm guessing
|
|
|
|
Post by Deleted on Sept 18, 2014 17:15:31 GMT -6
Yea my cell had the same problem it could hold poses but it was still very loose but i put a tiny bit of super glue on all the ball pegs and now its perfect!
|
|
